Line-X of Austin

Do you have a question that isn't answered here?

Write Us

Why LINE-X?

LINE-X is the only company that actually develops and manufactures its own material, guaranteeing consistent and reliable products with the highest quality control. The material is design to dry to the touch in a manner of seconds which allows an even distribution of material (i.e. the peak, valleys, and vertical surfaces have an even thickness with out runs or sags). Additionally, LINE-X uses a high temperature, high pressure system that yields a durable factory looking finish. We encourage you to take a look at the competition. Not so sure if our competition would say the same! Take a look at the LINE-X Advantage.

Does LINE-X interfere with installation of other accessories (campers, truck boxes, fifth wheels, etc)?

Generally, there should be no problem with the install of other accessories. If you have an accessory whose installation tolerance is less than 1/4", please be sure to discuss it with your local dealer. LINE-X goes extremely well with fifth wheels. You can first get the truck bed coated and then install the fifth wheel plate.

Is LINE-X repairable?

Yes, if you damage your truck, we can make seamless repairs. How long does it take? Typically about 3 hours. Call us, but you can normally drop it off in the morning and then pick it up that afternoon.

Can I use my truck right away?

Yes, LINE-X sets up in a about 3-5 seconds so it will definitely be ready to go when you pick up your truck. Wait about 24 hours for heavy duty use to allow it to fully cure.

What about the drain holes in my truck bed? Will they still be open?

Yes, one of the advantages of LINE-X over a drop-in is your truck's natural drainage system remains as designed. You don't get that splash the first time you go down the road after a big rain or get the big ice cube frozen in the back in the winter!

Will LINE-X withstand temperature extremes?

Yes, LINE-X is rated for use in temperatures from subzero to 250 F. You can find LINE-X trucks performing to specs in the cold of Alaska to the heat of Arizona.

Will the bed feel hotter than the rest of my truck?

No, due to the fact that LINE-X is bonded to the metal of your truck allowing efficient heat transfer (i.e. no thermos effect compared to a drop-in) it actually "feels" cooler than the metal on your truck on a hot day.

How much does it cost?

Please contact us and get a quote for your specific applications. The price can vary depending on the size of the vehicle and whether you want under vs. over the rail. Write us!

Can LINE-X be used as an undercoating?

Yes, however it works best in off body restoration projects where the vehicle is completely stripped.

What other applications can LINE-X be used for?

LINE-X can be applied to virtually any properly prepared surface. Where there is a need for a durable protective coating, LINE-X can be used. Some ideal examples are jeeps, vans, commercial trucks, semi tractors and trailers, boats......the list goes on.

What kind of warranty do I get?

LINE-X has a lifetime Warranty.
Click here to read about our nationwide lifetime warranty.

Is LINE-X Environmentally friendly?

Yes. LINE-X uses no VOCs, which may pose health risks, or CFCs, which can damage the ozone layer. Additionally LINE-X is approved for use in food preparation and has been certified for use in potable (drinking) water systems. For questions and comments, or to hear how the entire process works, write us.

Phone:

(512) 821-1951

Fax:

(512) 821-3022

Address:

8500 Research Blvd.
Suite C
Austin, TX 78758

View Map

Copyright 2008 Line-X of Austin